Lab Spray Dryer(Water-soluble)


Lab Spray Dryer(Water-soluble)

INNOVA Lab Spray Dryer is mainly suitable for the production of micro particle powder in the  laboratories of universities, research institutes, food, medicine, and chemical enterprises. It has wide applicability to solutions such as emulsions and suspensions. Because the material is sprayed into fine mist droplets, and then contacted with hot air, the contact surface area is large, and the instant heat can keep the composition of the material from being damaged.


● Color LCD touch screen parameters show: Air inlet temperature / outlet temperature / peristaltic pump speed / air volume / needle frequency.

● Fully automatic control: One-click start-up, after setting the spray process parameters, when the temperature reaches the predetermined temperature, the peristaltic pump starts automatically, and the operation process is displayed on the touch screen.

● Nozzle cleaner (pass needle): When the nozzle is blocked, it will automatically clear the blockage, and the frequency of the needle pass can be adjusted.

● Shutdown protection function: Just press the stop button when shutting down, and the machine will stop running immediately except for the fan, so as to ensure that the machine will not burn out the heating part due to misoperation (forcibly turning off the fan).

● Air compressor: Built-in imported oil-free air compressor, low noise, less than 60db.

● PID temperature control: High-precision PID temperature control technology is adopted, the temperature control accuracy range is 1°C, and the electric heating heat source is stable and environmentally friendly.

● Finished product effect: The normal distribution of the finished product particle size is relatively steep, the particles are uniform, and the fluidity is good.


Maximum water evaporation1500ml/h3000ml/h
Minimum feed quantity50ml80ml
Inlet air temperature                             ~250℃30~300℃~250℃
Drying chamber diameterΦ220mmΦ500mm
Atomizer                                                                                             Double fluid
Wind directionBlower typeInduced draft type
Drying chamber materialHigh borosilicate glass304 stainless steelGlass and stainless steelGlass or stainless steelGlass and stainless steelHigh borosilicate glass304 stainless steel304 stainless steel
Heater power3.5kW7.5kW
Total power4.5kW10kW