Features

● Compact and lightweight design, easy to move, and save laboratory space.

● 4.3” TFT precision resistance full-color touch screen and 32-bit ARM microprocessor.

● Automatic recognition of foot switch, filling with timing and infrared sensing function.

● Four innovative designs: flow intelligent calibration, quantitative correction, l °- 720 ° back suction angle setting, and buffer delay.

● Adopt the spring-open liquid separation pump head, which can quickly replace the liquid separation pipes of different specifications.

● The filling needle with an anti-drip design can meet sanitary requirements and protect every drop of your reagent.

● It is equipped with liquid separation pipes with different diameters to ensure accurate liquid separation accuracy while obtaining a variety of sub-loading ranges.

MFill-17 Technical Parameters :

● There are ≥ 20 fixed liquid separation modes with error ≤± 1.0%.

● The anti-drip separating head can be used to separate and pack various microbial reagents such as culture medium, buffer and diluent.

● The maximum amount of a single subpackage can reach 3000ml, the subpackage flow rate is 0.6mL-7000ml/min, the subpackage error is less than 1%.

● Sterilizable liquid separation tube, includes six kinds of liquid separation tubes with inner diameter of 1.6mm, 2.4mm, 3.1mm, 4.8mm, 6.4mm and 7.9mm .

● Five working modes: continuous conveying, timed filling, quantitative filling, duplicate filling and weighing filling.

● Working status, setting parameters, flow data and machine configuration are all displayed on the same screen, easy to operate.

● The membrane button controls the start/stop, and the external controller can also be connected for remote start/stop control.

● The design of separating the liquid pipe from the pump makes the fluid only pass through the sterilized liquid separation pipe to eliminate the possibility of pollution.